Pick-Up And Separation - Ricoh B230 Service Manual

Hide thumbs Also See for B230:

Table of Contents

Basic Operation

2.2.3 PICK-UP AND SEPARATION

The original is set with the image facing up. The original pushes actuator and the original

set sensor is activated.

After pressing the start button, the feed clutch is activated and the original feed unit [A]

moves down. At the same time, the pick-up solenoid is activated and the original table lifts

until the original comes in contact with the pick-up roller [B]. The pick-up roller then feeds

the top sheet of paper.

After being fed from feed belt [C], the topmost sheet is separated from the stack by the

separation roller [D] and sent to the skew correction roller.

The mechanism is an FRR system, consisting of the original feed belt [C] and separation

Table of Contents