Stapler Unit; Folder Unit Entrance Sensor - Ricoh B230 Service Manual

1.3.4 FOLDER UNIT ENTRANCE SENSOR

1. Open the front cover.
2. Pull out the staple folder unit.
3. Remove the exit cover [A] (
4. Remove the entrance sensor [B] (

1.3.5 STAPLER UNIT

1. Remove the rear cover.
2. Disconnect the connector [1] and release the harness (
3. Remove two screws [3].
SM
x 2).
x 1, x 1).
15
Folder
x 2 [2]).
B793