Jogger Movement - Ricoh B230 Service Manual

Detailed Section Descriptions

2.2.3 JOGGER MOVEMENT

The jogger tray unit consists of the front [A] and rear [B] jogger fences, two jogger motors
[C] and two jogger fence HP sensors [D].
Standby mode:
The jogger fences are placed at home position.
Sort mode:
The joggers move alternate sets to the front and rear, to separate the sets for the users.
At the start of the job, the jogger fences move to the front and rear sides.
When the first set of the job is fed to the jogger tray, the front jogger fence moves towards
the rear to stack the paper neatly.
When the second set of the job is fed, the rear jogger fence moves towards the front to
stack the paper neatly.
The front and rear fences continue to operate like this for alternate sets, until the end of
the job.
Staple mode:
Only the front jogger fence moves in staple mode.
B792 18 SM