Switching Temporarily To Tone Dialling (Dtmf) - Siemens Gigaset S675IP User Manual

Operating the base station on the PABX
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v N 5 O
~
Enter a number for the length
of the pause (1 = 1 sec.;
2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
a
Press and hold (idle status).
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling for
a connection (e.g. to listen to the network
mailbox) you must switch to touch tone
dialling for the call.
Precondition: You are currently conduct-
ing an external call via the fixed line net-
work or you have dialled an external fixed
line network number or an external call is
signalled.
Open menu.
§Options§
Select and press
Tone Dialing
Touch tone dialling is now activated for
this call only.
90
.
§OK§
.
§OK§