Authorisation; Specifications - Siemens Gigaset S675IP User Manual

Authorisation

This device is intended for analogue
phone lines in your network.
Voice over IP telephony is possible with an
additional modem via the LAN interface.
Country-specific requirements have been
taken into consideration.
We, Siemens Home and Office
Communication Devices GmbH & Co. KG,
declare that this device meets the
essential requirements and other relevant
regulations laid down in Directive 1999/5/
EC.
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address:
http://www.siemens.com/gigasetdocs.

Specifications

Recommended batteries
Technology:
Nickel-metal-hydride (NiMH)
Size: AAA (Micro, HR03)
Voltage: 1.2 V
Capacity: 600 – 1200 mAh
We recommend the following battery
types, because these are the only ones
that guarantee the specified operating
times, full functionality and long service
life:
u
Sanyo NiMH 800
u
GP 850 mAh
u
Yuasa Technologies AAA 800
The device is supplied with two recom-
mended batteries.
Handset operating times/charging
times
The operating time of your Gigaset
depends on the capacity and age of the
batteries and the way they are used. (All
times are maximum possible times and
apply when the display backlight is
switched off).
600
Standby time 130
(hours)
Talktime (hours)
Operating time for
1.5 hrs of calls per
day (hours)
Charging time,
base station
(hours)
Charging time,
charging cradle
(hours)
At the time of going to print, batteries up
to 900 mAh were available and had been
tested in the system. Due to the constant
progression in battery development, the
list of recommended batteries in the FAQ
section of the Gigaset Customer Care
pages is regularly updated:
www.siemens.com/gigasetcustomercare
Base station power consumption
The power consumption for the base sta-
tion is approx. 1.3 watt.
Appendix
Capacity (mAh)
800 1000 1200
175 220 265
7 10 12 14
70 90 115 135
6 9 11 13
5 7 8 10
125