Assigning Send And Receive Numbers; To Handsets - Siemens Gigaset S675IP User Manual

Assigning send and receive
numbers to handsets
You can assign up to eight numbers on
your phone: your fixed line network
number, your Gigaset.net number and six
VoIP numbers.
You can assign as many of these numbers
as you like to each handset as receive
numbers. Receive numbers determine
which handset(s) will ring when a call is
received.
You can assign one of your VoIP numbers
to each handset as a (VoIP) send number.
Send numbers define which VoIP account
should be used in general to make and pay
for outgoing VoIP calls. Exceptions:
u
A phone number is dialled with a line
suffix (page 96) or
u
A dialling plan has been defined for the
phone number (page 109).
The Gigaset.net number and fixed line
network number are permanently
assigned to each registered handset.
Please note:
A handset is assigned the following numbers
after it is registered on the base station:
– Receive numbers: all phone numbers
assigned to the phone (fixed line network,
Gigaset.net and VoIP).
– Send numbers: the fixed line network
number and the VoIP phone number that
you entered at the start of the phone con-
figuration.
¤
Open the following Web page:
¢ ¢
Telephony
The display shows all registered handsets.
A list is displayed for each handset show-
ing the phone numbers that are config-
ured and activated for the phone. The con-
nection names are shown in the
column. The fixed line network con-
tions
nection is always at the end of the list.
Settings
Number Assignment.
Connec-
¤
Define a VoIP phone number as the
send number for each handset. To do
this, click the option following the
phone number in the
previous assignment will automatically
be deactivated.
Please note:
The fixed line network number is perma-
nently assigned to each handset as a send
number. This assignment cannot be deacti-
vated. It ensures that emergency calls can
be made from every handset.
The Gigaset.net number is also perma-
nently assigned to each handset.
¤
Select the phone numbers for each
handset (fixed line network, VoIP) that
are to be assigned to the handset as
receive numbers. To do this, click the
option following the phone number in
the column. Every handset can
Receive
be assigned several phone numbers or
no phone number (
¤
Now click to save your settings.
Set
Please note:
– If a VoIP phone number that has been
assigned to a handset as a send number is
deleted/deactivated, then the handset will
automatically be assigned the first config-
ured VoIP phone number.
– If a phone number is not assigned to any
handset as a receive number, calls to this
number will be signalled on all handsets.
– If you have not assigned receive numbers
to any of the handsets, calls to all connec-
tions will be signalled on all handsets.
Web configurator
Send column. The
= assigned).
105