Siemens Gigaset S675IP User Manual page 61

Operating the base station answer machine
you can use a code transmitter (availa-
ble from your mobile phone retailer).
Please note:
Remote operation via VoIP connections is pos-
sible as long as DTMF signals are transmitted
(depending on the provider) as SIP info mes-
sages, audible signals in the voice channel
(inband or audio) or as special RTP data pack-
ets (pursuant to RFC2833).
Calling the answer machine and
playing back messages
Precondition: Your answer machine is
activated.
~
Dial your own number that is
assigned to the answer
machine as a receive number.
9 ~
When you hear your
announcement, press 9 and
enter the system PIN.
You will be informed whether any new
messages have been recorded. The mes-
sages are now played back. All messages
are played back irrespective of their
receive number. After the new messages,
the old messages are played back. Finally,
the remaining memory time is given.
You can control message playback by
means of the keypad.
Please note:
The answer machine will terminate the con-
nection under the following circumstances:
– An incorrect system PIN has been entered.
– There are no messages in the answer
machine
– After the remaining memory announce-
ment
60
Operating the answer machine via the
keypad
The following keys are used for operation:
A
Previous:
Go to the start of the current
message. Press repeatedly to
go to the previous messages.
B
Stop/resume:
Stop playback. Press again to
resume.
If there is a pause lasting
longer than one minute, the
connection to the answer
machine is terminated.
3
Next:
Skip to next message. Press
several times to go to the fol-
lowing messages.
:
New:
Mark current message as
"new". Start playback of the
following message.
0
Delete:
Delete current message.
Cancelling remote operation
¤
Press the end call key or replace the
receiver.
Activating the answer machine
¤
Phone home and allow the phone to
ring for around a minute. Use a phone
number that has been assigned to the
answer machine as a receive number.
You hear: "Please enter PIN".
~
Enter system PIN.
Your answer machine will be activated in
the set mode (page 55). It tells you how
much memory time is left.
The messages are now played back.
The answer machine cannot be deacti-
vated remotely.