Sms (Text Messages); Writing/Sending An Sms - Siemens Gigaset S675IP User Manual

SMS (text messages)

You can only send and receive SMS mes-
sages via the fixed line network.
When an SMS is sent, the base station
automatically establishes a connection via
the fixed line network.
Your phone is supplied ready for sending
SMS messages immediately.
Preconditions:
u
Calling Line Identification is enabled for
your fixed line network connection.
u
Your network provider supports SMS in
the fixed line network (information on
this can be obtained from your network
provider).
u
You are registered with your service
provider to send and receive SMS.
SMS messages are exchanged between
SMS centres operated by service provid-
ers. You must enter the SMS centre
through which you wish to send and
receive SMS messages into your phone.
You can receive SMS messages from every
SMS centre that is entered, provided you
have registered with your service provider.
Your SMS messages are sent via the Serv-
ice Centr. that is entered as the active
send service centre. However, you can
activate any other SMS centre as the active
send service centre to send a current mes-
sage (page 50).
If no SMS service centre is entered,
the SMS menu only contains the entry
Settings. Enter an SMS service centre
(page 50).
Information on writing an SMS can be
found in the appendix:
u
For how to enter text, see page 127.
u
Writing using the predictive text tool
EATONI, see page 128.
Please note:
u
If your phone is connected to a PABX,
see page 51.
u
To receive SMS messages you must be
registered with your service provider.

Writing/sending an SMS

Writing an SMS
¢ ¢
v î
SMS
Select mailbox if necessary
Mailbox 2
and press
~
Enter mailbox PIN if necessary
and press
Select and press
New SMS
~
Write an SMS.
Please note:
– Entering text with and without EATONI pre-
dictive text is described from page 128.
– EATONI is activated as a default setting.
How to activate/deactivate EATONI,
see page 129.
Sending an SMS
c
Press the talk key
or:
Press the display key.
§Options§
Send Select and press
Then:
SMS Select and press
s / C / ~
Select number with area code
(even if you are in that area)
from the directory or call-by-
call list, or enter number
directly. For sending SMS to an
SMS mailbox: add the mailbox
ID to the end of the number.
Press the display key.
§Send§
The SMS will be sent as soon as your
phone's fixed line network connection is
free.
SMS (text messages)
(page 49).
§OK§
.
§OK§
.
§OK§
.
§OK§
.
§OK§
45