Table of Contents
Advertisement
Annex
Errors
Error messages
Audible signal
Error message on display
This annex describes possible error messages and gives you the
country-specific settings. There is also a list of the factory default
settings.
Whenever there is an error, it may be signalled audibly or with an
error message on the display.
If you make an invalid entry or press a key that is not available, you
will hear the audible error signal and the optiPoint 300 basic tele-
phone will ignore the invalid command or entry. You can continue
by pressing one of the available keys or making a valid entry.
Error messages are displayed along the bottom part of the display.
The optiPoint 300 basic has two error messages:
#*#*#*#*#*#*#*#*#
Gatekeeper not found although HiPath = On
N< NEt
LAN disconnected; optiPoint 300 basic will automatically reboot
when LAN connection is restored.
Annex
80
Advertisement
Table of Contents
