Ftp Settings; Ftp Tx Settings - Konica Minolta bizhub C451 Network Scanner Operations

5
5.6

FTP settings

Specify the communication settings where an FTP server is used.

FTP TX settings

Specify the settings for sending scan data to an FTP server. Settings can be specified for the following.
Parameter
Proxy Server Address
Proxy Server Port
Number
Port No.
Connection Timeout
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the administrator
settings screen" on page 4-6.
2
Touch [4 FTP Settings] in the Network Settings screen.
3
Touch [1 FTP TX Settings].
FTP TX screen 1/2 appears.
4
To use FTP, touch [ON], and then specify the desired settings.
5-40
Description
Specify the address of the proxy server. Type in the address in the format of a host name,
IPv4 address or IPv6 address.
Specify the port number for the proxy server. To change the setting, press the [C] (clear)
key, and then use the keypad to type in the desired port number. (Range: 1 to 65535)
Specify the number of the port used for communicating with the FTP server. To change
the setting, press the [C] (clear) key, and then use the keypad to type in the desired port
number. (Range: 1 to 65535)
If transmission stops while data is being uploaded to the FTP server, the upload operation
is automatically aborted after a specified length of time has passed. Specify the length of
time from the point when the transmission stops to the point when the upload operation
is to be aborted. To change the setting, press the [C] (clear) key, and then use the keypad
to type in the setting. (Range: 5 to 300 seconds)
Network settings
bizhub C451/C550/C650