Ike Settings (Ipsec Settings) - Konica Minolta bizhub C451 Network Scanner Operations

Network settings
– After touching [Prefix Length] to specify a setting
4
Touch [OK], and then touch [OK] in the next screen that appears.
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.

IKE settings (IPsec settings)

Specify the settings for the IKE protocol used during IPsec communication. Settings can be specified for the
following.
Parameter
Encryption Algorithm
Authentication Algorithm
Key Validity Period
Diffie-Hellman Group
!
Detail
Different combinations of the encryption algorithm and authentication algorithm settings for IPsec
communication can be saved in four groups.
0 In order to apply the IPsec settings, settings must be specified for "IKE Settings", "IPsec SA Settings"
and "Peer".
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
2
To specify settings, touch [ON], and then touch [IKE Settings].
IKE Settings screen 1/2 appears.
bizhub C451/C550/C650
Description
Select the encryption algorithm to be used when creating control tunnels.
Select the authentication algorithm to be used when creating control tunnels.
Specify the length of time that the key is valid after being generated when creating
control tunnels.
Select the Diffie-Hellman group.
5
5-23