Konica Minolta bizhub C451 Network Scanner Operations page 69

Scanning
2
Touch [Address Book].
A list of registered destinations appears.
– The index appears if "Address Book Default" (displayed by touching [Custom Display Settings] on
the User Settings screen, then [Fax/Scan Settings]) is set to "Index". If "Address Type" is selected,
the index of destination types is displayed.
– The corresponding address appears as the name of the registered destination when an index button
is touched.
3
Touch a destination button to select the address.
The button appears selected, and the destination appears under "Broadcast Destinations".
– Multiple destinations can be specified at the same time.
– Additional destinations can be added by directly typing in the address.
4
Touch [Scan Settings], [Original Settings] or [Communication Settings], and then specify the desired
scan settings.
– For details on the scan settings, refer to "Specifying scan and transmission settings (Scan
settings/Original settings/Communication settings)" on page 3-47.
5
Load the document into the ADF or place it on the original glass.
6
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
Note
Do not turn off the machine until the scan job is deleted from the Job List screen.
bizhub C451/C550/C650
3
3-41