Specifying settings from the control panel
3.12
FTP settings
Settings for sending scan data to FTP servers can be specified.
FTP parameters
The FTP parameters are as follows:
FTP setting screen 1/3
Item
Proxy Server Address
Proxy Port Number
FTP setting screen 2/3
Item
Port No.
Connection Timeout
FTP setting screen 3/3
Item
FTP Client
FTP Server
C450
Description
Sets the proxy server address. Use the keypad in the
control panel to type in the address.
Sets the port number of the proxy server. To change the
value, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
Description
Set the port number used to communicate with the FTP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
If the transmission stops while uploading data to the FTP
server, the upload operation is automatically aborted after
a specified time elapses. Set the time from the point when
the transmission stops to the point when the upload
operation is to be aborted. To change the value, press the
[C] (clear) key, and then use the keypad to type in the value
(between 5 and 300 seconds).
Description
Sets whether to use the Scan to FTP operation.
Specify whether to use the FTP server. Enable the FTP
server when providing information from the machine using
a separate utility software.
3
3-59