Konica Minolta bizhub C451 Network Scanner Operations page 136

4
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit]. The registration
number cannot be changed in the Edit screen.
To delete a registered destination, select it, and then touch [Delete].
Note
The registration cannot be completed if no settings are specified for "Name", "Host Address", "File
Path", "User ID "and "Password".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
4-20
Specifying utility mode parameters
bizhub C451/C550/C650