Specifying utility mode parameters
5
Touch [Name], and then type in the registration name, using the keyboard that appears.
–
For details on typing in text, refer to "Entering text" on page 7-4.
6
Touch [OK].
7
Touch [Index], and then select the index characters.
8
Touch [OK].
9
Touch [User ID], and then type in the user ID, using the keyboard that appears.
10
Touch [OK].
11
Touch [Password], and then type in the password, using the keyboard that appears.
12
Touch [OK].
13
Touch
New screen 2/2 appears.
14
Touch [Host Address], and then type in the IP address or host name.
–
To enter a host name, touch [Host Name Input], and then type in the host name, using the keyboard
that appears.
–
To enter an IP address, touch [IPv4 Address Input] or [IPv6 Address Input], and then type in the
address, using the keypad or the number buttons that appear. Touch
to the desired position, and then type in the numbers.
–
When the input format is switched to entering an IP address after the host name was entered, the
host name is cleared.
–
If [Host Name Input] is touched after the IP address was entered, the entered IP address is saved
and the input screen appears.
–
Type the host name and file path in uppercase letters.
15
Touch [OK].
bizhub C451/C550/C650
or
.
4
or
to move the cursor
4-13