Ntp Server Address - Konica Minolta bizhub C451 Network Scanner Operations

Network settings

NTP server address

Specify the address of the NTP server.
1
Touch [Host Address] in the Time Adjustment Setting screen.
The Host Address screen appears.
2
Select the method for specifying the host address.
– To specify the host address as an IPv4 address, touch [IPv4 Address Input].
– To specify the host address as an IPv6 address, touch [IPv6 Address Input].
– To specify the host address as a host name, touch [Host Name Input].
– When [Host Name Input] is touched, check that the DNS setting is correctly specified. For details,
refer to "TCP/IP settings" on page 5-13.
3
Type in the host address (255 characters or less for a host name).
– To correct the entered IP address, touch
changed, touch [Delete], and then type in the desired number.
– To clear all entered values, press the [C] (clear) key.
– For details on typing in text, refer to "Entering text" on page 7-4.
4
Touch [OK].
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
The address of the NTP server is specified.
bizhub C451/C550/C650
or to move the cursor to the character to be
5
5-89