Connecting The Dvr Flashlight To A Pc - Safety Vision SV-1000 User Manual

Connecting the DVR Flashlight to a PC

Connect the DVR Flashlight to a PC to access snapshots and videos on the DVR
Flashlight's internal memory or the miniSD™ card.
To connect the DVR Flashlight to a PC:
Insert the mini USB plug on the included USB cable into the mini USB port on
the Interface Panel.
Insert the standard USB plug into an available USB port on a PC.
The USB Indicator illuminates on the LCD Display.
The PC recognizes the DVR Flashlight as a removable drive. The internal
memory appears as one drive, and if the miniSD™ card is inserted into the DVR
Flashlight, it appears as an additional drive.
Refer to your PC's operating system documentation for instructions on how to
access removable drives.
Save or transfer videos as needed using your PC's operating system.
WARNING - Once finished, make sure to use your PC's operating system to
properly disconnect the removable drive (DVR Flashlight) before physically
removing the USB Cable from the DVR Flashlight or PC.
13