Taking A Snapshot - Safety Vision SV-1000 User Manual

Taking a Snapshot

The DVR Flashlight captures still images in JPEG (.jpg) format.
To take a snapshot:
1.
Press and hold the Snapshot Button for two seconds.
The Data Indicator will flash for a few seconds. The DVR Flashlight is then
in Snapshot Mode.
2.
Steadily point the DVR Flashlight towards the object you want to
capture.
3.
Press the Snapshot Button.
The Data Indicator flashes momentarily. "01" displays on the left of the
LCD Display to indicate the DVR Flashlight has captured one still image.
4.
Repeat Steps 2 and 3 to take additional snapshots.
5.
Once finished, press and hold the Snapshot Button to exit out of
Snapshot Mode.
The time appears on the LCD Display.
11