2
Operation
2.1 The Control Panel
Symbol
Button for displaying the temperature of the pool water or for
2.2 Checks to be performed before operating the appliance
• the hydraulic connections must be tight,
• the unit must be stable (as well as level and upright),
• the electrical supply cable must not be exposed to sharp or hot elements
which could damage it or crush it.
2.3 Starting the appliance
• Open the water supply and adjust the valves, if any (see §1.3.3),
• Connect the heat pump to the power supply :
Designation
water fl ow
Heating
external pump
(option)
ambient air
temperature
Default
,
88.8
c
°
Not fl ashing
Water fl ow is
Water fl ow to low
correct
or no water fl ow
active
Refer to the manual of the optional feature
Suffi cient
"on/off" button
setting parameters
setting values buttons
Flashing
Starting up
inactive
insuffi cient
See §4
Off
/
/
then
7