Table of Contents
Advertisement
CanCam Manual_Layout 5 05/09/2013 12:21 Page 4
Quick Start Guide
This guide is designed to get the camera up and running in a matter of moments.
To get the most out of the CanCam and obtain a full understanding of its wide
range of options, please read the manual thoroughly before operating.
Quick Start-up:
•
Pull battery tab to activate batteries / Install 4 "C" cell batteries in correct
polarity (+/-) as indicated in the battery compartment.
•
Insert SD card into the camera.
•
Turn switch to CAM to adjust the Time and Date.
•
The internal LCD screen displays T blinking.
•
Press the [OK] button to start the Time settings.
•
Press the [UP] or [DN] button to adjust the Minute setting and press [OK] to
confirm and move to the Hour setting.
•
Repeat to set the Hour and then press [OK] to confirm and move to Date.
•
Adjust the Month, Day, and Year by using [UP] or [DN] button. Each time you
finish an adjustment you MUST press the [OK] button to confirm and move to
the next field for adjustment.
•
Once done, the word - dEL - will be blinking, this stands for Delete menu and
will allow you to format your SD Card. (This will delete ALL images). Press the
[M] button to exit.
•
Select PSET (or CAM to input customised settings, see advanced programming)
PSET
This bypasses all user defined settings and uses the following
settings:
(PIR mode / Resolution: 3MP / Burst: 3P / Time out: 30 seconds)
P-SET Factory Default Settings:
Time Out:
Burst Mode:
Resolution:
Operation Mode:
Video Mode:
Time lapse setting:
4
30 Sec
3 Still Image
3M
PIR
10 Seconds (VGA Resolution)
19:00-07:00 (Next day)
Hide quick links:
Advertisement
Table of Contents
