ESP CanCam User Manual page 11

CanCam Manual_Layout 5 05/09/2013 12:22 Page 11
• At this point there are several options:
– To view images or play videos: Click on the Removable Storage device and
then select the file you want to see.
– To save images and videos: Highlight the file or files you want to save and
drag them to your hard drive.
– To delete images and videos: Highlight the files or files you want to delete
and press the [DELETE] button.
– To erase all files and reformat the SD card: Right click on the Removable
Storage device under My Computer and select FORMAT then click START. A
Warning message will appear, press [OK]. Then CLOSE to exit.
– NOTE: Before you FORMAT, make sure you are certain it is the Removable
Storage icon for the camera is selected, and not any other device associated
with your computer.
• Once complete, simply unplug the cable from both the computer and the
camera. The camera will turn OFF automatically.
For Viewing on Your home TV:
• Attach the provided TV out cable to the TV port on the bottom of the camera
and insert the other end into the RCA VIDEO IN jacks on the TV.
• Turn on both the camera and TV.
• Make sure to switch to AUX / VIDEO IN mode on the TV.
– (See TV owner's manual for operations).
– If the TV monitor flickers, then you will need to proceed to the next step 'TV
Out System Settings" to change your camera's TV OUT from NTSC to PAL .
• A series of stills will be visible on the TV.
• Press the [UP] or [DN] button to navigate through your thumbnail images.
• On the upper left hand corner of the TV monitor, it will either display
the still OR the image with a video icon which indicates it's a video clip.
• To view in full screen, press the [OK] button.
• Press the [OK] button again, it will return to the thumbnail view from the full
screen image.
NOTE: All videos are recorded with audio, but only have sound when viewing
playback on a PC.
11