Christie Mirage M Series Setup Manual page 29

Function Key
IF WITHIN A NUMERIC FIELD IN A MENU: Use F
IF WITHIN A TEXT FIELD: Press F
between capital and lower case letters. Press F
insert or delete a character. Press F
IF WITHIN A PRESENTATION: Press F
numbers to enable a specific color or colors in the display (see right). For
example,
green data. Eliminating one or more colors can help with certain diagnostics
and setups, such as when accurately overlaying one image on top of another
from stacked projectors.
from numerous locations within the menu system.
Press F followed by H
UNC
Brightness Uniformity settings. This will disable the features without
changing the settings associated with them.
Projector
Press P
to access a specific projector within a group of projectors or to confirm if the local projector is
ROJ
listening. The number in the "Enter Number" window indicates which projector is currently listening to
commands, and will match the projector number that has been defined in the Menu Preferences menu.
The P
check box (read-only) shows whether or not the projector physically connected to a keypad is
ROJ
listening to commands from that keypad. A checkmark means that connected projector is listening; if there is
no checkmark, you are communicating with a different projector.
To control a specific projector with the keypad, press P
the projector you want to use. If you switch to a projector other than the one you are currently using, the
checkmark will disappear.
To broadcast to multiple projectors, press P
Keypad commands will then effect all projectors present.
projectors within the same wired configuration using the wired keypad exclusively, since there is only one
wired protocol available.
Communications Submenu.
Enter
Press E
to select a highlighted item, to toggle a check box, or to accept a parameter adjustment and return
NTER
to the previous menu or image.
Exit
Press E
to return to the previous level, such as the previous menu.
XIT
text editing boxes (including number editing of a slide bar value) or within pull-down lists. It acts as a
"cancel" in these cases.
Arrow Keys
Use the L /R
EFT IGHT
list without having to first scroll through options or navigate within a menu, pull-down list or text box.
Mirage M Series Setup Guide
020-100592-02 Rev. 1 (11-2010)
UNC
followed by E
UNC
will display only red, and
Color enabling can also be implemented
NOTE:
to disable Keystone, Edge Blending and
ELP
ROJ
The projector's address can be set in the Configuration Menu>
NOTE:
A K
to change a slide bar value or to select a different option within a pull-down
RROW EY
to enter a negative number.
UNC
followed by the U A
P RROW
followed by the L
UNC
to delete all characters.
NTER
followed by two numeric
UNC
will display
and then enter the three-digit number assigned to
ROJ
and then P
again without entering a projector number.
ROJ
There is no method of controlling a group of
NOTE:
Section 3: Operation
K or D A
EY OWN RROW
A K or R
EFT RROW EY IGHT
F 3-3 FUNCTION KEY
IGURE
E
does not save changes within
XIT
NOTE:
K
to convert
EY
A K
to
RROW EY
3-7