To Edit A Zone Label - Honeywell System 800 Operator's Manual

To edit a zone label

P1
1
2
A2
3
min
Select
Press select to change to a required
zone number
Previous
Press to select [label] field
To edit text in a field:
Edit
Press Edit button to
allow label editing.
Using the numeric keypad
enter the label.
ABC
1 2
GHI JKL
4 5
PQRS TUV
8
7
0
Next
If necessary, press
Next to move to the
next character position.
Each zone can have an individual 32 -
character label. A zone label is used to
describe the sub division of the protected
building where there is an event detected. In
the event of a fire the zone label is displayed
on the screen.
Next
Each press of an alphanumeric
key will scroll character
string, eg each press of key 2 will
scroll characters: A B C 2 a b c.
Each press of key 1 will scroll
character string 1 ? , . ; & * /
DEF
Each press of key 0 will scroll
3
character string 0 ( ) : @ [ ]
MNO
Function To copy text
6
Highlight a label
field and press
WXYZ
the Function key.
9
Edit
Function To paste text
Highlight a label
field and press edit and
then the Function key.
Enter access level 2 (A2) and use the
navigation buttons to highlight and
select options:
If a zone label is left blank
then the device label is displayed
in the event of a fire.
Previous
Press to select [Zone] field
796689 (4188-658) i2__04/07
Next
P1
1
2
3
25