Auxiliary Relay; Fire Routing Output; Fault Routing Output; Maintenance Reminder - Honeywell System 800 Operator's Manual

Auxiliary relay

Fire routing output

Fault routing output

Maintenance
reminder
34
796689 (4188-658) i2_04/07
The auxiliary relay function configures a
relay in the panel, which provides
changeover contacts for external use. The
relay can be configured to operate with fire
event (factory default setting), fault event or
disablement, or its function can be internally
disconnected.
The fire routing output function configures
the output facility that provides the signals to
operate equipment, such as an auto dialler
to call out the fire fighting organisation in the
event of a fire. The output can be manually
activated or de-activated.
The display also shows the settings of fire
routing delay time and its current operating
state (enabled or disabled).
The fault routing output function
configures the output facility that provides
the signals to operate equipment to call for
maintenance on the system. The output can
be manually activated.
The display also shows if the output is
enabled or disabled.
The maintenance reminder function
configures the triggering of a custom
message to appear when maintenance is
due on the system. The message may be a
phone number to call the servicing
organisation for system maintenance. The
day of the month can be configured here
along with a custom message.