Honeywell System 800 Operator's Manual page 39

No.
17 Fire Protection
Activated
18 Pre Alarm
19
(yellow)
20 Verification
(yellow)
21
(yellow)
22 Power
(green)
23 System fault
(yellow)
label light
(red)
(red)
Delay
Fault
operation and meaning
STEADY – The fire protection
output (fixed extinguishing) is
active.
OFF – The fire protection output is
not active.
STEADY – There is at least one
coincidence zone / device in pre-
alarm.
OFF – There is no zone / device in
coincidence fire.
STEADY – The delay mode is
active.
OFF – The delay mode is not
active.
STEADY – The verification delay is
active and alarms are being
delayed from sounding.
OFF – The verification delay is not
active.
STEADY – There is at least one
fault in the system, view the fault log
for details, see page 18.
OFF – There are no faults.
STEADY – The mains and battery
supplies are healthy.
OFF – There is no mains supply
nor battery supply at the panel.
STEADY – There is a system fault
(Micro failure and non-volatile
memory corruption).
OFF – There is no system fault.
796689 (4188-658) i2__04/07
39