To Cancel buzzer
Typical fault indications:
796689 (4188-658) i2_04/07
A fault condition is an automatic detection of
faults in the system requiring attention.
A fault detected in the fire alarm system is
given at the panel in the form of light
indication(s) and text message(s) on the
display, accompanied with an audible sound
from the local buzzer.
The table below shows individual
fault and associated message.
The panel will notify multiple faults
To silence the panel buzzer while the
system is in fault condition:
Press the Cancel Buzzer button.
Any fault repair on the system
must be carried out by the
output O/C or
A device on the loop
circuit has been
There is an open or
short circuit fault
associated with the
fire routing output.