Download  Print this page

To Verify Fire - Honeywell System 800 Operator's Manual

Gent fire alarm panel operator’s manual & log book.
Hide thumbs


To verify fire

To cancel buzzer
Cancel Buzzer
To silence alarms
Silence Alarms
To reset the system
If delay mode is ON, that is if the Delay light is
lit, the alarm sounders are inactive for a 30
seconds (factory set) duration. During this
time the alarm delay can be extended by a
pre-configured time (up to 10 minutes
maximum) by operating the Verify button.
Enter access level 2.
Press the Verify button.
The verification light is lit to show the fire
alarm delay has been extended.
NOTE: Operating Sound Alarms button or
if there is a subsequent fire event the
alarms are activated immediately.
To silence the panel buzzer while the
system is in fire condition:
Press the Cancel Buzzer button.
To stop the fire alarm sounders from
sounding, for example once the building has
been evacuated and the fire fighters are
present to attend to the fire.
Enter access level 2.
Press the Silence Alarms button.
After the emergency is over and the affected
devices have been restored for normal
operation and alarms have been silenced:
Enter access level 2
Press the Reset button.
796689 (4188-658) i2__04/07


   Also See for Honeywell System 800

   Related Manuals for Honeywell System 800

This manual also for:

Gent system 800

Comments to this Manuals

Symbols: 0
Latest comments: