Download  Print this page

Fire Test - Honeywell System 800 Operator's Manual

Gent fire alarm panel operator’s manual & log book.
Hide thumbs

Advertisement

Fire Test

To enter fire test
mode
16
796689 (4188-658) i2_04/07
The system 800 panel has a fire test facility,
which puts all the zones into test mode and
recommends which manual call point is to
be fire tested next.
A2
Enter access level 2.
Press Enter to display the top-level
menu.
From the System menu select Fire Test
option and press Enter to accept the
selection.
Press Enter to enter Fire test.
Now carry out a Fire Test on the
Test
recommended manual call point and notice
the alarms are only active for a short
duration. On completion exit test state.
In Test State all normal fire
detection functions are disabled.

Advertisement

   Also See for Honeywell System 800

   Related Manuals for Honeywell System 800

This manual also for:

Gent system 800

Comments to this Manuals

Symbols: 0
Latest comments: