Seagull Models GEEBEE ARTF Instruction Manual page 22

GEEBEE.
C/A glue.
INSTALLING THE BATTERY-RECEIVER.
1) Plug the six servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
Tie Wrap.
Receiver.
22
C/A glue.
Instruction Manual
Antenna.
ATTACHMENT WING - FUSELAGE.
Bolt the wing to fuselage.
Epoxy.
Trim and cut.