Seagull Models GEEBEE ARTF Instruction Manual page 20

GEEBEE.
M2 clevis.
Attach to servo arm in fuselage.
Rudder.
Metal clevis.
Control horn.
Elevator pushrod.
20
Elevator.
Elevator.
Elevator pushrod.
M2 lock nut.
Rudder pushrod.
Rudder pushrod.
Instruction Manual
M2 Lock nut.
Attach to elevator - rudder control horn.
2) Connect the elevator and rudder servos
to your radio's receiver and turn on the sys-
tem. Set the trim tabs on the transmitter to
neutral and center the servo arms. The eleva-
tor and rudder servo arms should be perpen-
dicular to the servos.
3) One at a time, hold the pushrods in po-
sition over the respective servos to check for
proper servo direction. If any servo turns in
the wrong direction, switch your radio's re-
versing switches as necessary to achieve the
correct direction.
Throttle.
Elevator.
Rudder.
Switch.
Elevator.