Draytek Vigor2830 Series User Manual page 99

D e t a i l s P a g e f o r 3
D e t a i l s P a g e f o r 3
To use PPP (for 3G USB Modem) as the accessing protocol of the internet, please choose
Internet Access from WAN menu. Then, select PPP mode for WAN2. The following web
page will be shown.
Available settings are explained as follows:
Item
3G/4G USB Modem (PPP
mode)
G / 4 G U S B M o d e m
G / 4 G U S B M o d e m
Description
Enable / Disable - Click Enable for activating this
function. If you click Disable, this function will be closed
and all the settings that you adjusted in this page will be
invalid.
SIM PIN code - Type PIN code of the SIM card that will
be used to access Internet.
Modem Initial String - Such value is used to initialize
USB modem. Please use the default value. If you have any
question, please contact to your ISP.
APN Name - APN means Access Point Name which is
provided and required by some ISPs. Type the name and
click Apply.
Modem Initial String2 - The initial string 1 is shared with
APN. In some cases, user may need another initial AT
command to restrict 3G band or do any special settings.
Modem Dial String - Such value is used to dial through
USB mode. Please use the default value. If you have any
question, please contact to your ISP.
PPP Username - Type the PPP username (optional).
87
( P P P ) i n W A N 3
( P P P ) i n W A N 3
Vigor2830 Series User's Guide