Draytek Vigor2830 Series User Manual page 246

Click any index number link to open the following page.
Available settings are explained as follows:
Item
Name
Common Name
Identifier
Base Distinguished
Name / Group
Distinguished Name
Additional Filter
After finished the above settings, click OK to save and exit this page. A new profile will be
created.
For detailed information about LDAP application, refer to section 4.14 How to Implement
the AD/LDAP Authentication for User Management?
Vigor2830 Series User's Guide
Description
Type a name for such profile. The length of the use name is
limited to 19 characters.
Type or edit the common name identifier for the LDAP server.
The common name identifier for most LDAP server is "cn".
Type or edit the distinguished name used to look up entries on
the LDAP server.
Sometimes, you may forget the Distinguished Name since it's
too long. Then you may click the
account information on the AD/LDAP Server to assist you
finish the setup.
This is an optional setting.
234
button to list all the