Draytek Vigor2830 Series User Manual page 40

VPI
VCI
Protocol /
Encapsulation
Fixed IP
IP Address
Subnet Mask
Primary DNS
Secondary DNS
Back
Next
Cancel
2. Please type in the IP address/mask/gateway information originally provided by your ISP.
Then click Next for viewing summary of such connection.
3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
4. Now, you can enjoy surfing on the Internet.
Vigor2830 Series User's Guide
Type in the value provided by ISP.
Auto detect – Click this button to have the VPI and VCI to
be detected by the system automatically
Type in the value provided by ISP.
There are several modes offered for you to choose for
WAN1 interface.
Click Yes to enable Fixed IP feature.
Type the IP address if Fixed IP is enabled.
Type the subnet mask.
Type in the primary IP address for the router.
Type in secondary IP address for necessity in the future.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
28