Draytek Vigor2830 Series User Manual page 96

DNS Server IP Address
After finishing all the settings here, please click OK to activate them.
D D e e t t a a i i l l s s
To use PPTP/L2TP as the accessing protocol of the internet, please click the PPTP/L2TP tab.
The following web page will be shown.
Detailed explanation is shown below:
Item
PPTP/L2TP
Vigor2830 Series User's Guide
Specify an IP address – Click this radio button to specify
some data if you want to use Static IP mode.
Default MAC Address: Click this radio button to use
default MAC address for the router.
Specify a MAC Address: Some Cable service providers
specify a specific MAC address for access authentication.
In such cases you need to click the Specify a MAC
Address and enter the MAC address in the MAC Address
field.
Type in the primary IP address for the router if you want to
use Static IP mode. If necessary, type in secondary IP
address for necessity in the future.
P P a a g g e e f f o o r r P P P P T T P P / / L L 2 2
Description
Enable PPTP- Click this radio button to enable a PPTP
ISP.

Username: Type a name as username. The
maximum length of the user name you can set is
63 characters.

Password: Type a password. The maximum
length of the password you can set is 62
characters.

IP Address: Type the IP address.

Subnet Mask: Type the subnet mask.

Gateway IP Address: Type the gateway IP
address.
T T P P i i n n W W A A N N 2 2
84