Draytek Vigor2830 Series User Manual page 19

Right LED
(Green)
Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
Phone 1/2
Line
GigaLAN (1-4)
DSL
WAN2(Giga)
USB
PWR
ON/OFF
On
Off
Description
Press "Wireless LAN ON/OFF/WPS" button once to wait for client device
making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to enable (WLAN LED on)
or disable (WLAN LED off) wireless connection.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
Connecter for analog phone(s).
Connector for PSTN life line.
Connecters for local networked devices.
Connecter for accessing the Internet through ADSL2/2+.
Connecters for remote networked devices.
Connecter for a USB device (for 3G USB Modem or printer).
Connecter for a power adapter.
Power Switch.
7
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps when left
LED is on.
Vigor2830 Series User's Guide