Draytek Vigor2830 Series User Manual page 231

Available settings are explained as follows:
Item
Name
Tag packets as
NO
Status
Local Address
Remote Address
DiffServ CodePoint
Service Type
3. For adding a new rule, click Add to open the following page.
Available settings are explained as follows:
Item
ACT
Ethernet Type
Local Address
Remote Address
Description
Display the name of such class.
Check the box to tag the packets with the header selected in
the drop down list for this class.
Display the number of the rules defined for such rule.
Display if such rule is enabled (Active) or not.
Display the local IP address (on LAN) for the rule.
Display the remote IP address (on LAN/WAN) for the rule.
Display the levels of the data for processing with QoS
control.
Display the service type of the data for processing with QoS
control
Description
Check this box to invoke these settings.
Please specify which protocol (IPv4 or IPv6) will be used
for this rule.
Click the Edit button to set the local IP address (on LAN)
for the rule.
Click the Edit button to set the remote IP address (on
LAN/WAN) for the rule.
219
Vigor2830 Series User's Guide