Draytek Vigor2830 Series User Manual page 118

Force router to use "DNS
server IP address"
settings as specified in ...
Inter-LAN Routing
After finishing all the settings here, please click OK to save the configuration.
To configure LAN 1 ~ LAN 4, or IP Routed Subnet, simply click Details Page to open the
settings page.
D e t a i l s
D e t a i l s
LAN1 is the default configuration for basic host connection.
Vigor2830 Series User's Guide
Enable/Disable – Enable/Disable the function of DHCP
Option. Each DHCP option is composed by an option
number with data. For example,
When such function is enabled, the specified values for
DHCP option will be seen in DHCP reply packets.
Option Number – Type a number for such function.
DataType – Choose the type (ASCII or Hex) for the data to
be stored.
Data – Type the content of the data to be processed by the
function of DHCP option.
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4 instead of DNS servers given
by the Internet Access server (PPPoE, PPTP, L2TP or
DHCP server).
Check the box to link two or more different subnets (LAN
and LAN).
P a g e f o r L A N 1
P a g e f o r L A N 1
Option number:100
Data: abcd
106