Draytek Vigor2830 Series User Manual page 100

WAN Connection
Detection
After finishing all the settings here, please click OK to save the configuration.
D e t a i l s
D e t a i l s
To use 4G USB Modem (DHCP mode) as the accessing protocol of the internet, please
choose Internet Access from WAN menu. Then, select 4G USB Modem (DHCP mode) for
WAN3. The following web page will be shown.
Available settings are explained as follows:
Item
4G USB Modem (DHCP
mode)
Vigor2830 Series User's Guide
PPP Password - Type the PPP password (optional).
PPP Authentication - Select PAP only or PAP or CHAP
for PPP.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Application >> Schedule web page and
you can use the number that you have set in that web page
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
P a g e f o r 4 G U S B
P a g e f o r 4 G U S B
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
M o d e m ( D H C P ) i n
M o d e m ( D H C P ) i n
88
W A N 3
W A N 3