Draytek Vigor2830 Series User Manual page 236

DNS Setup
Set to Factory
Default
View Log
Force Update
Auto-Update
interval
Index
WAN Interface
Domain Name
Active
3. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered hostname:
hostname and domain name suffix: dyndns.org in the Domain Name block. The
following two blocks should be typed your account Login Name: test and Password: test.
Available settings are explained as follows:
Item
Enable Dynamic
DNS Account
WAN Interface
Vigor2830 Series User's Guide
Clear all profiles and recover to factory settings.
Display DDNS log status.
Force the router updates its information to DDNS server.
Set the time for the router to perform auto update for DDNS
service.
Click the number below Index to access into the setting
page of DDNS setup to set account(s).
Display the WAN interface used.
Display the domain name that you set on the setting page of
DDNS setup.
Display if this account is active or inactive.
Description
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
WAN1/WAN2/WAN3 First - While connecting, the router
will use WAN1/WAN2/WAN3 as the first channel for such
account. If WAN1/WAN2/WAN3 fails, the router will use
another WAN interface instead.
WAN1/WAN2/WAN3 Only - While connecting, the router
will use WAN1/WAN2/WAN3 as the only channel for such
account.
224