Draytek Vigor2830 Series User Manual page 80

W A N 2
W A N 2
WAN2 is fixed with physical mode of Ethernet.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical type
Line Speed
VLAN Tag insertion
Vigor2830 Series User's Guide
w i t h E t h e r n e t
w i t h E t h e r n e t
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for WAN2 or choose
Auto negotiation for determined by the system.
If your choose According to Line Speed as the Load
Balance Mode, please type the line speed for downloading
and uploading for such WAN interface. The unit is kbps.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets
on the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
68