Draytek Vigor2830 Series User Manual page 78

Physical Mode / Type
Line Speed
Active Mode
Note: In default, each WAN port is enabled.
W A N 1
W A N 1
WAN1 is fixed with physical mode of ADSL.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical Type
Line Speed
Vigor2830 Series User's Guide
w i t h A D S L
w i t h A D S L
Display the physical mode and physical type of such WAN
interface.
Display the downstream and upstream rate of such WAN
interface.
Display whether such WAN interface is Active device or
backup device.
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
In such WAN interface, no type can be selected.
If your choose According to Line Speed as the Load
Balance Mode, please type the line speed for downloading
and uploading for such WAN interface. The unit is kbps.
66