2. After you click the Edit link, you will see the following page.
3. For adding a new service type, click Add to open the following page.
Available settings are explained as follows:
Item
Service Name
Service Type
Port Configuration
Description
Type in a new service for your request.
Choose the type (TCP, UDP or TCP/UDP or other) for the
new service.
Type - Click Single or Range as the Type. If you select
Range, you have to type in the starting port number and the
end porting number on the boxes below.
Port Number – Type in the starting port number and the
end porting number here if you choose Range as the type.
221
Vigor2830 Series User's Guide