Draytek Vigor2830 Series User Manual page 101

SIM PIN code
Network Mode
APN Name
MTU
WAN Connection
Detection
Modem Support List
After finishing all the settings here, please click OK to save the configuration.
D e t a i l s P a g e f o r I P
D e t a i l s P a g e f o r I P
When Offline is selected, the IPv6 connection will be disabled.
D e t a i l s P a g e f o r I P
D e t a i l s P a g e f o r I P
Type PIN code of the SIM card that will be used to access
Internet.
The maximum length of the PIN code you can set is 19
characters.
Force Vigor router to connect Internet with the mode
specified here. If you choose 4G/3G/2G as network mode,
the router will choose a suitable one according to the actual
wireless signal automatically.
APN means Access Point Name which is provided and
required by some ISPs. Type the name and click Apply.
The maximum length of the name you can set is 47
characters.
It means Max Transmit Unit for packet. The default setting is
1380.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
It lists all of the modems supported by such router.
v 6 – O f f l i n e i n W A
v 6 – O f f l i n e i n W A
v 6 – P P P i n W A N 1
v 6 – P P P i n W A N 1
89
N 1 / W A N 2 / W A N 3
N 1 / W A N 2 / W A N 3
/ W A N 2
/ W A N 2
Vigor2830 Series User's Guide