Draytek Vigor2830 Series User Manual page 232

Edit
DiffServ CodePoint
Service Type
4. After finishing all the settings here, please click OK to save the configuration.
5. By the way, you can set up to 20 rules for one Class. If you want to edit an existed rule,
please select the radio button of that one and click Edit to open the rule edit page for
modification.
E d i t t h
E d i t t h
1. To add a new service type, edit or delete an existed service type, please click the Edit link
under Service Type field.
Vigor2830 Series User's Guide
e S e r v i c e T y p e f o r
e S e r v i c e T y p e f o
It allows you to edit source address information.
Address Type – Determine the address type for the source
address.
For Single Address, you have to fill in Start IP address.
For Range Address, you have to fill in Start IP address and
End IP address.
For Subnet Address, you have to fill in Start IP address
and Subnet Mask.
All the packets of data will be divided with different levels
and will be processed according to the level type by the
system. Please assign one of the levels of the data for
processing with QoS control.
It determines the service type of the data for processing
with QoS control. It can also be edited. You can choose the
predefined service type from the Service Type drop down
list. Those types are predefined in factory. Simply choose
the one that you want for using by current QoS.
C l a s s R u l e
r C l a s s R u l e
220