Sony HXC-100 Service Manual page 111

For lens compatible with serial communication
1. Check that the lens number is 17.
2. Also check the lens name and minimum f-stop value that are set automatically.
3. Turn on the dynamic shading.
Adjust the white shading or V modulation only when the deviation occurs. In this case, the data is not
stored in the Lens File.
. Automatic white shading adjustment
Shoot the white pattern so that the video level is around 560 mV (80%).
→
[MAINTENANCE]
Or adjust the R/G/B/ white shading V SAW, V PARA, H SAW, and H PARA.
→
[MAINTENANCE]
[H|PARA|R/G/B]
. V modulation adjustment
Shoot the white pattern, and fi ne-adjust it with V modulation R/G/B/Master so that the video level
is around 560 mV (80%) with the lens iris set around F4 and the zoom control in the center of the
ring.
[PAINT] → [VIDEO|LEVEL]
4. Set the lens extender to OFF.
5. Adjust the white balance and fl are balance with the grayscale chart.
6. Zoom the lens and adjust the center marker to a position at which the object does not deviate.
n
The center marker position is stored in the Lens File immediately after the position is aligned, and is
not stored when Lens File Store is executed.
7. Execute Lens File Store.
→
[FILE] [LENS|FILE]
8. Set the lens extender to ON and repeat steps 5 to 7.
Calling
Using OPERATION Menu of This Unit
Select the Lens File that is set by selecting
HXC-100/V1 (E)
→
[WHITE|SHADING] [AUTO|WHITE|SHADING]
→
[WHITE|SHADING] [V|SAW|R/G/B]
→ [V|MOD|R/G/B/M]
→
[STORE|FILE]
[OPERATION]
[V|PARA|R/G/B]
,
→
[LENS|FILE]
.
[H|SAW|R/G/B]
, ,
4-9