Upgrading The Software Programs; Upgrading The Main Program - Sony HXC-100 Service Manual

1-10. Upgrading the Software Programs

The ROM (IC118 and IC122 on the SY-363 board) version can be upgraded using a Memory Stick.
For upgrading the software programs, follow the procedures below.

1-10-1. Upgrading the Main Program

Tool
Memory Stick
Check
Check the current main program version with BOOT VERUP of the SERVICE menu. (Refer to Section
5-3.)
Preparation
Copy the upgrading program to the Memory Stick in the following steps.
n
To get the upgrading program (program fi les "hsc300.rom" and "boot.rom"), contact your local Sony
Sales Offi ce/Service Center.
(1) Make the following directory on the Memory Stick.
\MSSONY\PRO\CAMERA\HSC300
(2) Copy the program fi les "hsc300.rom" and "boot.rom" to the directory made in step (1).
Procedure
1. Insert the Memory Stick that contains the upgrading program.
2. Turn on the power while pressing the RET 2 button at the front of the camera and the rotary encoder.
The upgrading status is displayed on the screen of the viewfi nder.
3. When the version upgrade is completed, a message "Complete" appears.
4. Check that the main program has been upgraded with BOOT VERUP of the SERVICE menu. (Refer
to Section 5-3.)
1-28
HXC-100/V1 (E)