Sony HXC-100 Service Manual page 44

6. Remove the three screws and remove the
transportation case from the CCD unit for
repair (option).
7. Install the CCD unit for repair by reversing
the steps above.
Work after replacement
Perform the following after the CCD unit is
replaced.
. 3-3. Electrical Alignment
(Sections 3-3-1 to 3-3-6)
. 3-6. RPN Compensation
. Re-setting the OHB File
2-2
Transportation case
P3 x 6
CCD unit for repair
HXC-100/V1 (E)