Scene File - Sony HXC-100 Service Manual

4-4. Scene File

Scene Files are fi les for storing the differences from the Reference File. Therefore, when the Reference
File is changed, output of the Scene File item corresponding to the item changed in the Reference File
also varies.
Scene fi les can be stored in the camera and memory stick. Scene fi les can also be stored in the memory
stick if the master setup unit (MSU) is used. For details, refer to the MSU operation manual.
Data is stored and called using the setup menu or MSU.
Scene fi les can be copied between cameras using the memory stick.
n
Before storing data in the memory stick, make sure that the LOCK switch on the memory stick is set to
OFF.
Storing (Refer to step 1 of Fig.4-3.)
Using PAINT Menu of This Unit
1. Change the scene fi le item to the desired value.
2. Select the scene fi le number to be stored.
→ →
[PAINT] [SCENE|FILE] [STORE]
With MSU
1. Change the scene fi le item to the desired value.
2. Press "STORE" of the scene fi le, and press the STORE number.
Calling and Clearing the Call (Refer to step 2 of Fig.4-3.)
Using PAINT Menu of This Unit
Select the scene fi le number to be called on the SCENE FILE page. A fi le currently being called is indi-
cated with its fi le number highlighted. Select the number again to cancel the call and resume the previous
status.
With MSU
Press and light a SCENE FILE button of the desired number while the STORE button is not lit. Press the
lit button again to cancel the call and turn off the button.
4-4
HXC-100/V1 (E)