Sony HXC-100 Service Manual page 109

Reading the Reference File from the Memory Stick (Refer to step 3 of Fig. 4-4.)
Using FILE/MAINTENANCE Menu of This Unit
1. Reference File data stored in the camera can be changed by reading the Reference File data stored in
the memory stick.
2. The Reference File data in the memory stick cannot be applied to the camera only by reading the data.
To apply the data, execute the automatic level adjustment.
[MAINTENANCE] → [AUTO|SETUP]
n
Reference File data stored in the memory stick cannot be read when the power is just turned on.
Storing the Reference File in the Memory Stick (Refer to step 1 of Fig. 4-4.)
Using FILE Menu of This Unit
Stores the Reference File stored in the camera in the memory stick.
Initializing All File Items (Refer to step 4 of Fig. 4-4.)
Using FILE Menu of This Unit
Camera unit
Current paint data
Output to hardware
HXC-100/V1 (E)
→ [AUTO|LEVEL]
Storing in
memory stick
(Step 1)
Storing
(Step 1)
Reference File
Calling
(Step 2)
Fig. 4-4. Reference File Operating Procedure
Memory stick
Readng from
memory stick
(Step 3)
Initializing
(Step 4)
Reference File
factory-set value
(Initial value 0)
4-7