Table of Contents
Advertisement
www.seagullmodels.com
2) Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
Tie wrap.
bracket and drill 1mm pilot holes at the loca-
Tie wrap.
tions marked.
Receiver.
3) Secure the tail wheel bracket in place
using two 3x10mm wood screws. Be careful
not to overtighten the screws.
Battery.
Antenna.
MOUNTING THE CONTROL CLASP.
See pictures below.
ATTACHMENT WING-FUSELAGE.
Attach the aluminium tube into fuselage.
Control clasp.
2x20mm.
2 screws.
INSTALLING THE BATTERY-RECEIVER.
Insert two wing panels as pictures below.
1) Plug the six servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
19
Hide quick links:
Advertisement
Table of Contents
